General Specs |
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Name | B14 “Patches”  |
||||||||
| Achievements | 8th Overall, 7th Design, 2nd Fuel, 10th Skidpad, 6th Business | ||||||||
| Weight | 272 lbs (dry) | ||||||||
| Wheelbase | 60″ | ||||||||
| Track F/R | 45″/45″ | ||||||||
Chassis |
|||||||||
| Material | 4130 steel tubular spaceframe | ||||||||
| Chassis Weight | 74 lbs | ||||||||
Suspension and Brakes |
|||||||||
| Type F/R | Unequal length double A-arm, Anti-roll bar / Independent push rod suspension | ||||||||
| Tyres | Hoosier LC0 10×6 | ||||||||
| Wheels | 3 piece aluminum wheels with custom designed centers | ||||||||
| Uprights | Custom designed 6061 aluminum uprights | ||||||||
| Shocks | Öhlins TTX25 / Penske 7800 | ||||||||
| Springs | H&R Formula 3 Springs / Eibach 1.625″ ID ERS | ||||||||
| Steering | Miltera Steering Rack | ||||||||
| Calipers | Brembo P32G | ||||||||
| Rotors | Custom designed ductile iron rotors | ||||||||
| Wheel Bearing | Two 35mm deep groove ball bearings per upright | ||||||||
Drivetrain |
|||||||||
| Drive Type | Two chains | ||||||||
| Differential | Spool | ||||||||
| Axles | Filament wound carbon fiber tube with a [+/-15,+/-45,0+/-45,+/-15] ply layup, 1.875in OD, and .120in wall thickness | ||||||||
| Hubs | 7075-T6 custom designed and machined with four 3/8-24 lug studs on a 2in BC | ||||||||
Engine |
|||||||||
| Type | Swissauto 250 | ||||||||
| Fuel | 100 Octane | ||||||||
| Induction | Naturally aspirated | ||||||||
| Compression Ratio | 12.8:1 | ||||||||
| ECU | MoTeC M400 | ||||||||
| Intake | Custom carbon fiber intake manifold with 20mm intake restrictor | ||||||||
| Exhaust | Stainless steel headers with Coast Fab muffler | ||||||||
Body |
|||||||||
| Material | Wet layup carbon-fiber | ||||||||
| Mounting | Cam-Lock | ||||||||
Aerodynamics |
|||||||||
| Front Wing | – | ||||||||
| Rear Wing | – | ||||||||
| Undertray | – | ||||||||